how to make a 4g smart phone

Hello guys, today in this page you are going to see how to make a smart phone. 
Components required:
. 2mega pixel camera
. 0.8mega pixel camera
.  Sim card module
. Motherboard
.  Lens for camera 
.  Antenna module
.  Flex cable
.  Bluetooth and GPS module
.  Micro Heat sink
.  3.7v battery 5000 mah
.  Speaker
.  Micro soldering
.  Micro USB slot
.  Audio jack slot
 
Now see the images before you buy 
. Cameras

. Sim card module 

. Motherboard 
In the motherboard I have installed micro USB port, audio jack, heatsink for management of temperature.

. Antenna module
I am using the older antenna module you can use latest one. 

. Flex cable 

. Battery 6000 mah
I have connected these batteries in series hence the voltage of the battery would remain same and back up will increase. 
These are li-ion 3.7v battery 2000mah.

. Bluetooth and GPS module 
If you want to understand it better then see the image given below 


You have to connect volume adjuster and on /of Switch  in the motherboard but I have not enough space so I am using to connect in the sim card slot. 
Connect all the wires with the help of flex cable. 
Here is the circuit if you are troubling. 

Make a case according to the length and do soldering carefully because you should do here microsoldering. Please make sure your motherboard has latest Android version otherwise it will not work.if there is older one you can replace it to newer one by micro soldering. If you are not able to do microsoldering please go electronic  shop for microsoldering otherwise your module, parts could be damaged. 

Thank you!!!. 

"Best of luck with creating your smartphone! Feel free to share your progress and the final product with me."



Comments

Popular posts from this blog

Famous Tourist places in PATIALA

BLUETOOTH SPY CAMERA